Dial Telkom Speedy ADSL with Debian

Some time there are problems with a modem with TPLINK, namely difficult to PPPoE mode and when it is successful the next difficulty is, when the modem is Dead, he can not autoredial itself, making the resetting with the manual.

Then show him the idea to try using the debian etch, to create the first live one block ip in the router interface in the other one with Modem, and make sure the modem can pinging from debian and the mode of modem is : BRIDGE

The next step is to prepare the packages do support for the process dial adslnya later, while in the package you should install are: pppoe and pppoeconf, installnya enough to run the command:

# apt-get install pppoe pppoeconf (* let the process continue and tetep kelarkan installation *).

Furthermore, if already installed the next step is to configurasi and run the pppoe dial speedynya experiment.

Configurasi file in: /etc/ppp/peers/dsl-provider, nah dsl-provider file in the backup so that when the first dial fail and can be repeated again.

# cd /etc/ppp/peers
# cp dsl-provider dsl-provider.ori

Now we try to do configurasi internet connection, there are some things I needed to help expedite the process of installation, including:

1. Login name given by ADSL Provider (Speedy).
2. Password that's also from ADSL Provider (Speedy).
3. If more than 2 interfaces ensure speedy interface you which direction and when the modem to dial UTP is connected.

Run 'pppoeconf' I have in/usr/sbin:

# cd /usr/sbin #
# pppoeconf # Pppoeconf

* if interface more than one he will choose the interface where you connect to the modem *

Live in only enter Yes, the device will scan information:

If detected you have a modem connected, the display will appear below:

Living in yes, a notification will appear again:

There is a notification message back, as follows:

The next step is to form fill user and passwd fromADSL Provider (Speedy).

view the content of password:

Well here DNS provides the option to add the DNS Speedy in / etc / resolv.conf and then restart each resolv akan still filled by DNS from speedy, that trouble you here I met when I want to make a connection between loadbalance Speedy with a wisp, as they can not rule created a local DNS manually and can not be in the perfect configuration, but if the debian pc to normal, this is not a problem . .

Just chooseYes on the recommendations.

Then there will be a message for the packet size, what if you want to stay in default then yes :

Next message mengenable redeal for speedy restart each debiannya:

The next message you need to be, below:

It is finished configurasi dial speedynya, and does not need to do the same because it has automatic redial speednya.

To prove there is not connection speednya, can diliat with the command:

# ip a or ifconfig

at interface list now we have interface with the name: ppp0, nah this is pppoenya interface.